Wireless HDMI Extender 50M
![Wireless HDMI Extender 50M]()
![Wireless HDMI Extender 50M]()
![Wireless HDMI Extender 50M]()
![Wireless HDMI Extender 50M]()
-9%
Wireless HDMI Extender 50M
Available:In Stock
- Category:HDMI Matrix
Rs.45,405.00
Rs.50,000.00
- Order within
High Quality Wireless HDMI Extender 50M HD 1080P Video/Audio Signal Transmission System HDMI wireless Extender Transmitter and Receiver
Wireless HDMI Extender 50M
Introduction
This HDMI Wireless extender uses 5G technology which enables high-speed, high performance wireless communication among consumer electronics, computer and mobile devices.
It combines high bandwidth capacity to robust error-correction ,to deliver uncompressed HD video, multi-channel surround sound.
It can go through the wall, and the transmitting distance of wireless can be up to 50m in the open area.
Features
Support HDMI 1.4a version
Support HDCP1.3
Wireless conform to IEEE802.15.4 and IEEE802.11
Support input & output the highest resolution up to 1920x1080/60Hz
Support transmitter the highest resolution up to 720P/60Hz
Support the highest rate 1.485G and TMDS clock up to 148.5Mhz
Working in 5G frequency band, it is not easy to be interfered by Wireless signals
The longest distance can be 50m (Under the condition of open area)
5V/1.5A power adaptor
Specifications:
HDMI version ………………………………………………… HDMI 1.4a
HDMI resolution ………………………………up to 1920x1080/60Hz
Support audio format……..............DTS-HD/Dolby-trueHD/DTS/Dolby-AC3/DSD
Max bandwidth……………………………..………………………148.5MHz
Max baud rate……………….…….…….…..…………1.485Gbps
Input cable distance….…….….. (1080p resolution) ≤8m AWG26 HDMI standard cable
Output cable distance.……….…(1080p resolution) ≤8m AWG26 HDMI standard cable
Transmitter Max working current………………………………………...……….....850mA
Receiver Max working current………………………………...………………….....450mA
Power adapter format……..….input AC (50Hz, 60Hz) 100V-240V; output: DC5V/1.5A
Operating Temperature range………………………...……………………(-15to +55)
Dimension (L x W x H)………………..............…………………......…….136x78x23 (mm)
Connection and Operation:
1: Connect the HD source to the input of the wireless extender TX with 1 HDMI cable
2. Connect the output of the wireless extender TX to the source with 1 HDMI cable
3: Connect the output of the wireless extender RX to the display with 1 HDMI cable
4: Connect 5V/1.5A power adapter to the TX and RX.
The code:
The transmitter and the receiver extender have matched well in the factory, But if the user needs to match again (ex: the matched well transmitter or receiver needs to match other receiver or transmitter)
Please follow the steps:
1.TX: Connect the power supply in shutdown mode, hold down the code button and then press the power button again; OFF indicator light is off, ON indicator light is on.
2.RX: Connect the power supply in shutdown mode, hold down the code button and then press the power button again; OFF indicator light is off, ON indicator light is on.
3.When the “ON”light of TX and the RX and Wireless light are on, the code is successful;
Firstly release the power button and then release the code button.
When the "OFF" is on，the whole process of code is over. After the reboot, it can be used.
Instruction:
1.Bright “OFF” shows shutdown, and Bright “ON” shows working state.
2.When Wireless is flashing , it is transmitting or receiving HDMI Wireless signal; When the IR is flashing, it has received the infrared signal (the signal of remote control).
3.“Pair” is code button, “Reset” is Reset button ( Please use tiny hard objects to touch button, such as a toothpick) ,after the HDMI Extender is reset, "OFF" light is on .
4."Power" is switch button, when it works state ,press "Power ",after the "ON" indicator is bright, and the extender will work; When it is shutdown, press "Power " ( above 3S ),the "OFF" indicator is off, and the extender will be shutdown.
Package include
1.TX & RX
2.IR TX cable
3.Power adapter
4.User manual
- Brand Name: HDCVT
- Connector A: HDMI
- Model Number: 50M
- Type: Optical Fiber Cables
- Connector B: HDMI
- Gender: Female-Female
- Bundle: Bundle 1
- Packing: Carton Box
- Shielding: Combination
- Outer Diameter: No
- Feature: HDMI1.4
- Package: Yes
- Application: Multimedia
- Item Name: Wireless HDMI Extender 50M
- Connector Color: Gold
- Connector Type: HDMI
- Gender: Female-Female
- HDMI Vertiong: 1.4
- Type: Wireless HDMI Extender 50M
High Quality Wireless HDMI Extender 50M HD 1080P Video/Audio Signal Transmission System HDMI wireless Extender Transmitter and Receiver
Wireless HDMI Extender 50M
Introduction
This HDMI Wireless extender uses 5G technology which enables high-speed, high performance wireless communication among consumer electronics, computer and mobile devices.
It combines high bandwidth capacity to robust error-correction ,to deliver uncompressed HD video, multi-channel surround sound.
It can go through the wall, and the transmitting distance of wireless can be up to 50m in the open area.
Features
Support HDMI 1.4a version
Support HDCP1.3
Wireless conform to IEEE802.15.4 and IEEE802.11
Support input & output the highest resolution up to 1920x1080/60Hz
Support transmitter the highest resolution up to 720P/60Hz
Support the highest rate 1.485G and TMDS clock up to 148.5Mhz
Working in 5G frequency band, it is not easy to be interfered by Wireless signals
The longest distance can be 50m (Under the condition of open area)
5V/1.5A power adaptor
Specifications:
HDMI version ………………………………………………… HDMI 1.4a
HDMI resolution ………………………………up to 1920x1080/60Hz
Support audio format……..............DTS-HD/Dolby-trueHD/DTS/Dolby-AC3/DSD
Max bandwidth……………………………..………………………148.5MHz
Max baud rate……………….…….…….…..…………1.485Gbps
Input cable distance….…….….. (1080p resolution) ≤8m AWG26 HDMI standard cable
Output cable distance.……….…(1080p resolution) ≤8m AWG26 HDMI standard cable
Transmitter Max working current………………………………………...……….....850mA
Receiver Max working current………………………………...………………….....450mA
Power adapter format……..….input AC (50Hz, 60Hz) 100V-240V; output: DC5V/1.5A
Operating Temperature range………………………...……………………(-15to +55)
Dimension (L x W x H)………………..............…………………......…….136x78x23 (mm)
Connection and Operation:
1: Connect the HD source to the input of the wireless extender TX with 1 HDMI cable
2. Connect the output of the wireless extender TX to the source with 1 HDMI cable
3: Connect the output of the wireless extender RX to the display with 1 HDMI cable
4: Connect 5V/1.5A power adapter to the TX and RX.
The code:
The transmitter and the receiver extender have matched well in the factory, But if the user needs to match again (ex: the matched well transmitter or receiver needs to match other receiver or transmitter)
Please follow the steps:
1.TX: Connect the power supply in shutdown mode, hold down the code button and then press the power button again; OFF indicator light is off, ON indicator light is on.
2.RX: Connect the power supply in shutdown mode, hold down the code button and then press the power button again; OFF indicator light is off, ON indicator light is on.
3.When the “ON”light of TX and the RX and Wireless light are on, the code is successful;
Firstly release the power button and then release the code button.
When the "OFF" is on，the whole process of code is over. After the reboot, it can be used.
Instruction:
1.Bright “OFF” shows shutdown, and Bright “ON” shows working state.
2.When Wireless is flashing , it is transmitting or receiving HDMI Wireless signal; When the IR is flashing, it has received the infrared signal (the signal of remote control).
3.“Pair” is code button, “Reset” is Reset button ( Please use tiny hard objects to touch button, such as a toothpick) ,after the HDMI Extender is reset, "OFF" light is on .
4."Power" is switch button, when it works state ,press "Power ",after the "ON" indicator is bright, and the extender will work; When it is shutdown, press "Power " ( above 3S ),the "OFF" indicator is off, and the extender will be shutdown.
Package include
1.TX & RX
2.IR TX cable
3.Power adapter
4.User manual
Features
Support HDMI 1.4a version
Support HDCP1.3
Wireless conform to IEEE802.15.4 and IEEE802.11
Support input & output the highest resolution up to 1920x1080/60Hz
Support transmitter the highest resolution up to 720P/60Hz
Support the highest rate 1.485G and TMDS clock up to 148.5Mhz
Working in 5G frequency band, it is not easy to be interfered by Wireless signals
The longest distance can be 50m (Under the condition of open area)
5V/1.5A power adaptor
Specifications:
HDMI version ………………………………………………… HDMI 1.4a
HDMI resolution ………………………………up to 1920x1080/60Hz
Support audio format……..............DTS-HD/Dolby-trueHD/DTS/Dolby-AC3/DSD
Max bandwidth……………………………..………………………148.5MHz
Max baud rate……………….…….…….…..…………1.485Gbps
Input cable distance….…….….. (1080p resolution) ≤8m AWG26 HDMI standard cable
Output cable distance.……….…(1080p resolution) ≤8m AWG26 HDMI standard cable
Transmitter Max working current………………………………………...……….....850mA
Receiver Max working current………………………………...………………….....450mA
Power adapter format……..….input AC (50Hz, 60Hz) 100V-240V; output: DC5V/1.5A
Operating Temperature range………………………...……………………(-15to +55)
Dimension (L x W x H)………………..............…………………......…….136x78x23 (mm)
Connection and Operation:
1: Connect the HD source to the input of the wireless extender TX with 1 HDMI cable
2. Connect the output of the wireless extender TX to the source with 1 HDMI cable
3: Connect the output of the wireless extender RX to the display with 1 HDMI cable
4: Connect 5V/1.5A power adapter to the TX and RX.
The code:
The transmitter and the receiver extender have matched well in the factory, But if the user needs to match again (ex: the matched well transmitter or receiver needs to match other receiver or transmitter)
Please follow the steps:
1.TX: Connect the power supply in shutdown mode, hold down the code button and then press the power button again; OFF indicator light is off, ON indicator light is on.
2.RX: Connect the power supply in shutdown mode, hold down the code button and then press the power button again; OFF indicator light is off, ON indicator light is on.
3.When the “ON”light of TX and the RX and Wireless light are on, the code is successful;
Firstly release the power button and then release the code button.
When the "OFF" is on，the whole process of code is over. After the reboot, it can be used.
Instruction:
1.Bright “OFF” shows shutdown, and Bright “ON” shows working state.
2.When Wireless is flashing , it is transmitting or receiving HDMI Wireless signal; When the IR is flashing, it has received the infrared signal (the signal of remote control).
3.“Pair” is code button, “Reset” is Reset button ( Please use tiny hard objects to touch button, such as a toothpick) ,after the HDMI Extender is reset, "OFF" light is on .
4."Power" is switch button, when it works state ,press "Power ",after the "ON" indicator is bright, and the extender will work; When it is shutdown, press "Power " ( above 3S ),the "OFF" indicator is off, and the extender will be shutdown.
Package include
1.TX & RX
2.IR TX cable
3.Power adapter
4.User manual
- Brand Name: HDCVT
- Connector A: HDMI
- Model Number: 50M
- Type: Optical Fiber Cables
- Connector B: HDMI
- Gender: Female-Female
- Bundle: Bundle 1
- Packing: Carton Box
- Shielding: Combination
- Outer Diameter: No
- Feature: HDMI1.4
- Package: Yes
- Application: Multimedia
- Item Name: Wireless HDMI Extender 50M
- Connector Color: Gold
- Connector Type: HDMI
- Gender: Female-Female
- HDMI Vertiong: 1.4
- Type: Wireless HDMI Extender 50M
Related items
Rs.28,378.00
Rs.30,000.00
Rs.85,000.00
Rs.95,000.00