PSB T6 Floor-standing speaker
Review: 5 - "A masterpiece of literature" by , written on May 4, 20020
Great

PSB T6 Floor-standing speaker

Available:In Stock
Rs.0.00
Image
  • Order within
Secure

About the PSB Image T6


Excellent performance...and an exceptional value

Experience the kind of clean, balanced sound that has earned PSB speakers a sterling reputation among high-end audio circles. The Image T6 borrows from driver technologies developed for PSB's sophisticated Imagine family and their top-tier Synchrony speakers, giving you high-end sound at a budget-friendly price. The Image line also features a slightly different cabinet design than its predecessors, showcasing clean lines that won't clutter up your listening room.

Image family

PSB's Image speaker family (Image T6 shown center left)


High-tech drivers produce clean, well-balanced sound

K2 Power crossover network

The tweeter uses a powerful neodymium magnet for crystal-clear highs.

The Image T6 features a 1" titanium dome tweeter that effortlessly dishes out smooth, uncolored highs. The tweeter sits just below the midrange in a unique arrangement that's characteristic of PSB's high-end Synchrony speakers. The long-excursion, high-output 5-1/4" midrange driver and dual 6-1/2" woofers use the same proprietary ceramic-filled polypropylene cones as the Imagine line. The stiff, lightweight cone material helps them deliver midrange that's clean and balanced, with excellent imaging. Each of the woofers is contained in its own ported internal enclosure, which allows for extended, defined bass response uncommon for a speaker of this size.


Sleek, thoughtful cabinet design

All Image speakers have heavy internal bracing and 1-1/8" thick MDF cabinets to ensure impressively solid, acoustically inert enclosures. These cabinets have a traditional look, but with slightly curved tops and fronts to soften it. This family of speakers also features attractive vinyl finishes, allowing the Image speakers to easily integrate into just about any décor.

Got wire?

Most speakers don't include any. Learn about choosing and installing speaker wire at the Crutchfield Learning Center.
Shop our selection of speaker wire.

From the review Rocking the house with the PSB Image T6 speakers

"Ultimately, I think, the test of a great speaker rests on your enjoyment of the music. I had the pleasure of testing the T6s by listening to music and artists I've thoroughly enjoyed for years. Can a speaker make a difference? Can an old tune take on new life? The answer to both is a resounding 'yes.'"


— Marshall Chase, A/V Writer


Product highlights:

  • frequency response: 32-23,000 Hz (±3dB)
  • sensitivity: 91 dB
  • impedance: 6 ohms
  • recommended power: 20-200 watts
  • 1" titanium dome tweeter with neodymium magnets
  • 5-1/4" clay ceramic-filled polypropylene midrange woofer
  • dual 6-1/2" clay ceramic-filled polypropylene woofers
  • dual port, bass reflex design
  • two sets of gold-plated five way binding posts — can be bi-wired
  • black ash vinyl finish
  • 7-7/8"W x 40-5/8"H x 15-1/8"D
  • MFR # Image T6 BK

What's in the box:

  • Floor-standing loudspeaker
  • Grille
  • 4 Rubber tipped leveling feet
  • 4 Carpet spikes
  • Spike wrench
  • 2 Input terminal jumpers (installed)
  • Owner's manual (English/ French/ Spanish/ German)
  • Specification sheet (English/ French/ Spanish/ German)

 

Features & specs

General
Enclosure Bass Reflex
Finish Vinyl
Color Black 
Tweeter Dome
Tweeter Size (inches) 1
Midrange Size (inches) 5.25
Woofer Size (inches) 6.5
Woofer Composition Clay/Ceramic/Poly
Woofer Surround Rubber
Built-in Powered Sub No
Dolby Atmos Drivers
Video-Shielded No
Connector Type 5-way post
Bi-amp Inputs Yes
Parts Warranty --------
Labor Warranty --------
Specifications
Power Range 20-200
Frequency Response 32-23k Hz
Sensitivity 91 dB
Impedance (Ohms) 6
Subwoofer Amp Power ---
Height (inches) 40-5/8
Width (inches) 7-7/8
Depth (inches) 15-1/8
Weight 48.5 lbs

 

Driver Technology

Cone Design: The midrange and woofer cones are clay/ceramic filled polypropylene to optimize the combination of stiffness, internal damping, and low mass. The magnetically neutral polycarbonate baskets contribute additional stiffness, and the bullet-shaped phase-plugs enhance linearity at higher frequencies.

Tweeter: The 1" titanium dome, Ferrofluid cooled tweeters use a neodymium magnet structure to help extend the frequency response at both ends for effortless, airy top octaves and smooth, uncolored response.

Crossover Network: The crossover is a 3-way acoustical fourth order Linkwitz-Riley type with a 24 dB/octave slope. The crossover points are 500 Hz and 2,200 Hz.

Connections

Binding Posts: The dual binding post input terminals are located on the lower rear of the speaker cabinet. The two sets of binding posts are shorted together by a gold-plated jumper. With the jumper removed the Imagine T6 can be bi-wired or bi-amplified. The binding posts will accept spade connectors, single banana plugs, pin connectors, and bare wire up to 8 gauge.

Mounting Options

Leveling Feet: The Imagine T6 includes two sets of leveling feet; the rubber covered feet are used on a hard surface and add approximately 1/2" to the height of the speaker, the carpet spikes add approximately 1" to the height.

Specifications

Frequency Response:

  • On Axis @ 0°: 32-23,000 Hz (+/-3 dB)
  • On Axis @ 0°: 45-20,000 Hz (+/-1.5 dB)
  • Off Axis @ 30°: 45-10,000 Hz (+/-1.5 dB)
  • Low Frequency Cutoff -10 dB: 28 Hz

Sensitivity:

  • Anechoic Chamber: 89 dB
  • Typical Listening Room: 91 dB

About the PSB Image T6


Excellent performance...and an exceptional value

Experience the kind of clean, balanced sound that has earned PSB speakers a sterling reputation among high-end audio circles. The Image T6 borrows from driver technologies developed for PSB's sophisticated Imagine family and their top-tier Synchrony speakers, giving you high-end sound at a budget-friendly price. The Image line also features a slightly different cabinet design than its predecessors, showcasing clean lines that won't clutter up your listening room.

Image family

PSB's Image speaker family (Image T6 shown center left)


High-tech drivers produce clean, well-balanced sound

K2 Power crossover network

The tweeter uses a powerful neodymium magnet for crystal-clear highs.

The Image T6 features a 1" titanium dome tweeter that effortlessly dishes out smooth, uncolored highs. The tweeter sits just below the midrange in a unique arrangement that's characteristic of PSB's high-end Synchrony speakers. The long-excursion, high-output 5-1/4" midrange driver and dual 6-1/2" woofers use the same proprietary ceramic-filled polypropylene cones as the Imagine line. The stiff, lightweight cone material helps them deliver midrange that's clean and balanced, with excellent imaging. Each of the woofers is contained in its own ported internal enclosure, which allows for extended, defined bass response uncommon for a speaker of this size.


Sleek, thoughtful cabinet design

All Image speakers have heavy internal bracing and 1-1/8" thick MDF cabinets to ensure impressively solid, acoustically inert enclosures. These cabinets have a traditional look, but with slightly curved tops and fronts to soften it. This family of speakers also features attractive vinyl finishes, allowing the Image speakers to easily integrate into just about any décor.

Got wire?

Most speakers don't include any. Learn about choosing and installing speaker wire at the Crutchfield Learning Center.
Shop our selection of speaker wire.

From the review Rocking the house with the PSB Image T6 speakers

"Ultimately, I think, the test of a great speaker rests on your enjoyment of the music. I had the pleasure of testing the T6s by listening to music and artists I've thoroughly enjoyed for years. Can a speaker make a difference? Can an old tune take on new life? The answer to both is a resounding 'yes.'"


— Marshall Chase, A/V Writer


Product highlights:

  • frequency response: 32-23,000 Hz (±3dB)
  • sensitivity: 91 dB
  • impedance: 6 ohms
  • recommended power: 20-200 watts
  • 1" titanium dome tweeter with neodymium magnets
  • 5-1/4" clay ceramic-filled polypropylene midrange woofer
  • dual 6-1/2" clay ceramic-filled polypropylene woofers
  • dual port, bass reflex design
  • two sets of gold-plated five way binding posts — can be bi-wired
  • black ash vinyl finish
  • 7-7/8"W x 40-5/8"H x 15-1/8"D
  • MFR # Image T6 BK

What's in the box:

  • Floor-standing loudspeaker
  • Grille
  • 4 Rubber tipped leveling feet
  • 4 Carpet spikes
  • Spike wrench
  • 2 Input terminal jumpers (installed)
  • Owner's manual (English/ French/ Spanish/ German)
  • Specification sheet (English/ French/ Spanish/ German)

 

Features & specs

General
Enclosure Bass Reflex
Finish Vinyl
Color Black 
Tweeter Dome
Tweeter Size (inches) 1
Midrange Size (inches) 5.25
Woofer Size (inches) 6.5
Woofer Composition Clay/Ceramic/Poly
Woofer Surround Rubber
Built-in Powered Sub No
Dolby Atmos Drivers
Video-Shielded No
Connector Type 5-way post
Bi-amp Inputs Yes
Parts Warranty --------
Labor Warranty --------
Specifications
Power Range 20-200
Frequency Response 32-23k Hz
Sensitivity 91 dB
Impedance (Ohms) 6
Subwoofer Amp Power ---
Height (inches) 40-5/8
Width (inches) 7-7/8
Depth (inches) 15-1/8
Weight 48.5 lbs

 

Driver Technology

Cone Design: The midrange and woofer cones are clay/ceramic filled polypropylene to optimize the combination of stiffness, internal damping, and low mass. The magnetically neutral polycarbonate baskets contribute additional stiffness, and the bullet-shaped phase-plugs enhance linearity at higher frequencies.

Tweeter: The 1" titanium dome, Ferrofluid cooled tweeters use a neodymium magnet structure to help extend the frequency response at both ends for effortless, airy top octaves and smooth, uncolored response.

Crossover Network: The crossover is a 3-way acoustical fourth order Linkwitz-Riley type with a 24 dB/octave slope. The crossover points are 500 Hz and 2,200 Hz.

Connections

Binding Posts: The dual binding post input terminals are located on the lower rear of the speaker cabinet. The two sets of binding posts are shorted together by a gold-plated jumper. With the jumper removed the Imagine T6 can be bi-wired or bi-amplified. The binding posts will accept spade connectors, single banana plugs, pin connectors, and bare wire up to 8 gauge.

Mounting Options

Leveling Feet: The Imagine T6 includes two sets of leveling feet; the rubber covered feet are used on a hard surface and add approximately 1/2" to the height of the speaker, the carpet spikes add approximately 1" to the height.

Specifications

Frequency Response:

  • On Axis @ 0°: 32-23,000 Hz (+/-3 dB)
  • On Axis @ 0°: 45-20,000 Hz (+/-1.5 dB)
  • Off Axis @ 30°: 45-10,000 Hz (+/-1.5 dB)
  • Low Frequency Cutoff -10 dB: 28 Hz

Sensitivity:

  • Anechoic Chamber: 89 dB
  • Typical Listening Room: 91 dB